Tower Type Hydraulic Breaker
High mounting point for maximum vertical impact force
Wide working angle for horizontal and trench work
Long piston stroke delivers up to 25% higher impact energy
Tower Type Hydraulic Breaker
Our Tower Type Hydraulic Breaker mounts at a higher point on the excavator arm than box or side type models. This raises the direct line of force, delivering stronger vertical impact for primary rock breaking and high-rise demolition.
The higher mounting point also gives the boom a wider working angle, making the breaker more flexible for horizontal work, trenching, and uneven ground. The detachable front head simplifies tool changes and on-site maintenance.
Applied To:
0.8-40 ton excavator
Features:
High mounting point for stronger vertical impact
Wide working range for trenching and underwater work
All Models Available
Hot Sale Models Specifications
| Specification | A68/SB40 | A140/SB81 | A155/SB121 | A165/SB131 | A175/SB151 |
| Chisel Diameter | 68mm | 140mm | 155mm | 165mm | 175mm |
| Whole Weight | 320Kg | 1990Kg | 2850Kg | 3300Kg | 4450Kg |
| Oil Flow | 40-60L/min | 120-180L/min | 180-240L/min | 190-260L/min | 200-250L/min |
| Working Pressure | 90-130Bar | 160-220Bar | 180-230Bar | 200-240Bar | 210-240Bar |
| Setting Pressure | 160Bar | 210Bar | 250Bar | 260Bar | 270Bar |
| Working Frequency | 500-990BPM | 350-450BPM | 200-300BPM | 150-300BPM | 120-200BPM |
| Impact Energy | 1020J | 6500J | 10930J | 13200J | 15500J |
| Excavator Class | 5.0-7.5T | 20-25T | 25-30T | 30-36T | 35-40T |
| We offer hydraulic breaker OEM service compatible with all brands and models of excavators, backhoe loaders, and skid steers currently available on the market. All products can be engraved with your company name and logo. Of course, you can opt for our private label option. | |||||
WHERE TOWER TYPE PERFORMS BEST
Tower Type Hydraulic Hammer Applications
At ARTUS, we built the Tower Type Hydraulic Breaker around one structural choice: mount it higher on the boom than a box or side-type unit. That single change does two things — it puts the chisel directly in line with the boom’s downward force, so more energy reaches the rock on every blow, and it gives the boom a wider working angle, so operators can reach more of the job site without repositioning the excavator. The four working conditions below are where that combination matters most.
Underwater Operation
In underwater demolition, divers can’t reposition the excavator, so every strike has to count. We engineer the Tower Type’s boom geometry for exactly this: a wider working angle that lets one fixed position cover submerged slopes, scattered rock, and uneven riverbeds without re-anchoring the machine.
Tunneling
Inside tight tunnels, there is no room to maneuver. Instead of backing out the excavator to reset, the ARTUS Tower Type Hammer features an elevated mounting point to widen your pivoting range. Operators can adjust and crush rock on the fly without shifting tracks—saving hours of repositioning every shift.
Primary Rock Breaking
Primary breaking in an open pit or quarry is a volume game: the faster oversized rock comes down, the faster the haul trucks move. A higher mounting point means more of the boom’s downward force reaches the chisel on every blow, so our Tower Type breaks through large rock faces in fewer strikes than a lower-mounted design.
High-Rise Demolition
Tearing down a tall structure usually means working from a fixed boom position at height, with no easy way to apply additional force by repositioning. That’s where the Tower Type’s high mounting point earns its name — it keeps the strike force in a straight line down through reinforced concrete and structural steel, blow after blow.
Artus Tower Type Hydraulic Breaker Advantages
Open-Frame Structure: Eliminate Hidden Failures
Enclosed housings hide damage until a sudden breakdown occurs. Our open design exposes key bolts and bushings, letting you catch wear early during routine checks to prevent costly downtime.
Detachable Front Head: Fast On-Site Tool Changes
A worn chisel shouldn’t mean pulling the whole breaker off the boom. The independent front head detaches swiftly for ultra-fast on-site changes, keeping your excavator moving.
Wider Working Angle: More Ground, Less Repositioning
Moving the excavator mid-job wastes fuel and valuable time. The elevated mounting geometry widens the boom’s working range, covering significantly more ground from a single spot.
Higher Mounting Point: 25% Higher Impact Energy
Conventional lower brackets lose critical energy before hitting the rock. We raised the pivot point to perfectly align the downward force, delivering up to 25% higher impact energy per blow.
Every Advantage Across the Full Range
Artus Global Hydraulic Breaker Solutions
We manufacture every Tower Type model in-house, from compact units to heavy-duty breakers for large mining excavators. That means consistent quality control across the full range, OEM customization on request, and one point of contact for your entire fleet, no matter how many tonnage classes you run.
10000+
Units/Year Output
3000+
Global Clients
98%
Success Rate
South Africa
A South African quarry was losing daily output to slow secondary breaking on oversized granite blocks, with haul trucks sitting idle between strikes.
We matched a higher-energy Tower Type model to the granite’s hardness rating. Clearing time dropped by roughly a third.
Vietnam
A Vietnamese dredging crew kept repositioning the excavator to reach submerged rock at different depths, losing working time with every move.
Our Tower Type’s wider working angle lets one position cover the whole slope. The section finished five days early.
Indonesia
An Indonesian tunnel crew backed the excavator out every time the rock profile changed angle, costing about twenty minutes each cycle.
ARTUS breakers let operators adjust the strike angle without leaving the heading, saving an estimated two days off the drive.
United Arab Emirates
A UAE demolition team’s previous breaker lost impact force at full boom extension, forcing extra passes on a 12-story structure.
Our Tower Type Hydraulic Breaker held the impact force steady at full extension. The job finished with no major equipment stoppage.
Different Working Conditions with Our Breakers
Artus Delivers Tailor-Made Solutions Over 80 Countries
Every site brings a different combination of rock hardness, excavator brand, climate, and project deadline. A breaker that performs well in a dry quarry won’t necessarily hold up in a humid coastal tunnel or a desert demolition site at 45°C. We size and configure our Tower Type Hydraulic Breaker to match local conditions instead of shipping the same fixed setup everywhere, and the four projects show what that process delivered.
Tran Minh Hoang
Vietnam
“We dredge the same river bend every season, and for years, repositioning the excavator ate up half our working window. The water level shifts, the rock pile moves, and every time we had to swing the machine into a new spot just to reach the next stretch of slope. With the ARTUS Tower Type Hydraulic Breaker, one position covers the whole stretch from the shallow edge down to the deeper channel. My crew isn’t waiting on the machine anymore, and we’re finishing each section days ahead of where we used to be. That’s the kind of change that actually shows up in our schedule, not just on paper.”
Carlos Medina
Chile
“We run primary breaking on a granite face that destroys most equipment within a year. Every block needs more force than the last, and for a long time, our highest cost wasn’t fuel or labor — it was how many strikes it took to bring down a single block before the truck could even load it. The ARTUS Tower Type’s mounting height puts more of that force into the rock instead of losing it through the boom. We’re not breaking blocks twice anymore, and the trucks aren’t standing around waiting on us. Over a full year, that adds up to real tonnage, not just a faster afternoon.”
Brands We Serve
We Offer Every Make and Model Hammer/Breaker
Switching to Artus shouldn’t mean rethinking your excavator fleet. Our breakers mount directly to factory specifications, with no extra modification step or added lead time. If your machine has a less common configuration, our engineering team can build a custom fit based on your exact dimensions, so every Artus breaker is ready to work the moment it arrives.
Genuine Quality Guaranteed
Artus Spare Parts For Hydraulic Breakers
How long your equipment stays in service often comes down to how fast parts can reach you. Artus keeps core wear components in stock year-round, shipping globally within 24–48 hours of order confirmation, so a missing seal kit or chisel never has to take your whole breaker offline. Every part is machined to genuine factory dimensions, fitting precisely regardless of which brand your breaker body comes from — eliminating the secondary failures that come from ill-fitting replacements.
Through Bolts
Front Bushing
Cylinder Assy
Front Heads
Side Bolts
Inner Bush
Chisels
Pistons
Rod Pin
Diaphragm
Seals Kit
Back Head
